Zinc Chloride Anhydrous Solution Pure & IP BP USP Manufacturers

Muby Chemicals and a few more manufacturing units are in Mubychem Group, the pioneer manufacturer of Zinc Chloride, Calcium Chloride, Potassium Chloride, Sodium Acetate, Sodium Thiosulphate, Ammonium Chloride, & Pharmaceutical Chemicals in India since 1976. Currently we have manufacturing facilities spread across Western India. No other vendor in the world knows Zinc Chloride any better than we do. We are exporters to all the countries across the globe.

(FDA) GMP GLP Approved, ISO-9001 Certificate, "REACH" registered, ISO-22000, Kosher Certified, Halal Certified, HACCP

Zinc Chloride Anhydrous & Solution Manufacturers

Synonyms: Zinc Dichloride, Zinc Butter; CAS No.: 7646-85-7
Molecular Weight: 136.30; Chemical Formula: ZnCl2

SPECIFICATIONS & GRADES OF ZINC CHLORIDE

PARTICULARS	BATTERY GRADE	EXTRA PURE GRADE
Assay	94-98%	98-99%
Appearance	Snow-white	Snow-white
Ammonia as NH4Cl	2% max	0.1% max
Alkalies and Alk.Earth	1.5% max	0.1% max
Iron & Lead	0.005% max	0.001% max
Dry Basis Assay	98%	99.5% min
PACKING (or as required)	25-50 Kg. Leak-proof	25-50 Kg. Leak-proof

Zinc Chloride Pharma grade is used extensively by the Pharmaceutical and Fine Chemicals manufacturing industry for various complex organic reactions.

Zinc Chloride Pharma Grade

PARTICULARS	PHARMA GRADE
Assay (Zn as ZnCl2)	95-98 %
Appearance	Snow-white
Ammonia as NH4Cl	1% max
Alkalis and Alk. Earth	1% max
Iron & Lead	0.005% max
Dry Basis Assay	99% min
Zinc Oxide	1% max
L.O.D. @ 250C	1% max

Typical Specification of Zinc Chloride Solution Lye or Brine

PARTICULARS	LYE
Assay (as ZnCl2)	40-42%
Appearance	Water White Liquid
Iron & Lead	Less than 10 ppm
Specific Gravity	1.40-1.45

We offer Zinc Chloride IP Zinc Chloride BP Zinc Chloride USP and Zinc Chloride Ph. Eur. from our world class FDA approved, ISO-9001-2008 Certified facility, Anmol Chemicals

ZINC CHLORIDE IP (ZnCl2)

Particulars	IP Grade
Description	White or practically white, powder, odorless, very deliquescent
Assay	95.0 - 100.5
pH	Between 4.6 – 6.0
Aluminum, Calcium, Heavy Metals, Iron & Magnesium	Passes the Test
Ammonium Salts	Passes the Test
Oxychloride	Passes the Test
Sulphate	Passes the Test
Packing	In 50 Kgs. HDPE Drums with double HMHDP liners

Zinc Chloride USP

Assay— Zinc Chloride contains not less than 97.0 percent and not more than 100.5 percent of ZnCl2.
Packaging and storage— Preserve in tight containers.
Identification— A solution of it responds to the tests for Zinc and for Chloride.
Limit of oxychloride— Dissolve 1.0 g in 20 mL of water, add 20 mL of alcohol, and mix. To 10 mL of the mixture add 0.30 mL of 1.0 N hydrochloric acid: the solution becomes perfectly clear.
Sulfate— Dissolve 1.0 g in 30 mL of water: 20 mL of this solution shows no more sulfate than corresponds to 0.20 mL of 0.020 N sulfuric acid (0.03%).
Limit of ammonium salts— To 5 mL of a solution (1 in 10) add 1 N sodium hydroxide until the precipitate first formed is re-dissolved, and then warm the solution: no odor of ammonia is perceptible.
Lead— Dissolve 0.50 g in 5 mL of water, and transfer the solution to a color-comparison tube (A). Add 15 mL of Potassium Cyanide Solution (1 in 10), mix, and allow the mixture to become clear. In a similar, matched color-comparison tube (B) place 5 mL of water, and add 2.50 mL of Standard Lead Solution (see Heavy Metals 231 ) and 15 mL of Potassium Cyanide Solution (1 in 10). Add to the solution in each tube 0.1 mL of sodium sulfide TS. Mix the contents of each tube, and allow to stand for 5 minutes: viewed downward over a white surface, the solution in tube A is not darker than that in tube B (indicating not more than 0.005% of lead).
Alkalies and alkaline earths— Dissolve 2.0 g in about 150 mL of water contained in a 200-mL volumetric flask. Add sufficient ammonium sulfide TS to precipitate the zinc completely, dilute with water to volume, and mix. Filter through a dry filter, and reject the first portion of the filtrate. To 100 mL of the subsequent filtrate add 5 drops of sulfuric acid, evaporate to dryness, and ignite: the weight of the residue does not exceed 10 mg (1.0%).
Organic volatile impurities: meets the requirements

Zinc Chloride Anhydrous & Solution manufacturers:

MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favour that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again.

Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Brazil Chile Argentina Dubai Cameroon Guatemala Mexico Peru ---